Safety shower test units

Laboratory safety showers should be tested once a month to check the functionality and the requested water flow rate of 60 l/min in an emergency case.

This mobile test unit provides a very convenient and easy solution to test your body safety showers and handheld eye showers.

Transparent PVC water reservoir on castors, 110 litre capacity
Built-in suction pump (230 V) and IP 45 protected power switch
Drain hose (2 m) to empty the water reservoir
Separate mounts for drain hose and power cord

Centrally placed under the body safety shower the big funnel can be extended to a height of 2,30 metres, while the smaller funnel is designed to collect the water from handheld eye showers (min. flow rate: 6 l/min).

The collected water amount can be read on the water reservoir scale from 0 to 110 litres. The built-in electrical suction pump will empty the reservoir in a very short time.

According to EN 15154-1,2:2006 the water flow rate of the plumbed-in body showers shall be at least 60 l/min and 6 l/min of the plumbed-in eye wash units.

Enquire Now

Applications:
- Reliable solution for body safety showers and handheld eye showers.

Reliable. Customisable. Quality Assurance.

RS-Simulation Asia uses only original spare parts and all functions are tested against our stringent quality specifications.

We provide both natural and artificial environment simulations such as temperature, humidity, vibration, thermal shock, battery test and more.
Accredited calibration laboratory with MS ISO/IEC17025:2017 (SAMM 975)
On-site calibration of climatic test chambers based on methods such as Guideline DKD-R-5-7.
Customisable chamber module solutions to meet clients’ specific requirements.
3S (sales, service, spare parts) facility centre is based in Puchong, Malaysia to provide maximum supports and to achieve greater customer satisfaction.